Table of Contents
Ball Valve, Characteristics of Ball Valves
Ball valves are mechanical devices that regulate, guide, direct, and modulate the flow of a variety of substances such as gas, pressure, liquids, and so on. D Chel Valves are the leading Ball Valves Manufacturer in India. There are several varieties of ball valves, each with its own design for a specific use, but the fundamental ball valve parts are the same for all of them. Ball valves can be classed based on a variety of characteristics, including:
- Ball valves are readily classified by the number of ports they have. There are two ports on a typical ball valve (1 inlet and 1 outlet). A 3-way port can have one inlet and two outlets, or two inlets and one exit.
- Floating and trunnion-mounted versions are available.
- Unibody, two-piece, or three-piece body assembly.
- Teflon and metal seats are available.
- Full bore, reduced bore, and V-notch bore sizes are available.
- Ball Valves entrance is from the side or from the top.
Types of Ball Valves
Ball Valves have a variety of features, standards, and groups that can help you determine their intended uses and expected performance. Valve designs are one of the simplest methods to filter through the vast array of valves available and discover a good fit for a project or process. D Chel Valves Suppliers and provides solely quality tested Two Way Ball Valves. Ball Valves at D Chel Valves bear several toughness and hardness check before provision them to our purchasers. Our Ball Valves and Their types are manufactured according to International ASTM/ASME, ANSI, API, DIN Standards in India.
Two-Piece Ball Valves
Product Description: Split Body or Two-Piece body design, manufactured in stainless steel and carbon steel, both forged and casting material.
Size range: 1/4-2″.
Three Piece Ball Valves
Product Description: Three-piece body design, manufactured in stainless steel and carbon steel, both forged and casting material.
Size range: 2″-36″.
Fully Welded Ball Valve
Product Description: Manufactured in stainless steel and carbon steel, available in both floating and trunnion ball, fire-safe design.
Size range:1/2-42″.
One Piece Ball Valve
Product Description: One Piece body design, manufactured in stainless steel and carbon steel, both forged and casting material. optional lockable handle, blow-out proof stem.
Size range:1/4-2″.
To know other types of ball valves visit: Ball Valves Manufacturer
Ball Valves Applications
- Ball Valves are used for flow and pressure control and shut off for corrosive fluids, slurries, normal liquid, and gases.
- Ball Valves are used in the oil and natural gas industry, but also find a place in many manufacturing sectors, chemical storage, and even residential uses.